Skip to main content

Introduction to Message Queuing Telemetry Transport (MQTT)

The Message Queuing Telemetry Transport (MQTT) is a lightweight protocol designed to allow many devices to publish data on the network. MQTT is a lightweight message protocol that is designed to allow a high message throughput even over networks with limited bandwidth. Its publish and subscribe mechanism and use of a broker server make it possible to reliably communicate messages over low-bandwidth networks even if the message publisher and subscriber have an unreliable connection to the network. MQTT is ideally suited to the Internet of Things, where there are many small devices publishing information to the network. Clients can subscribe to messages from any devices with a single connection to a broker. For more information on MQTT, see MQTT.orgOpens in a new tab.

InterSystems IRIS® data platform supports MQTT 3.1. The MQTT specification is defined as an OASIS standard, in a new tab.

The MQTT adapter EnsLib.MQTT.Adapter.InboundOpens in a new tab sends MQTT connect, subscribe, and receive messages. The EnsLib.MQTT.Adapter.OutboundOpens in a new tab sends MQTT publish messages.

You can develop custom business services and operations using these adapters, or you can use the built-in business service and operation, EnsLib.MQTT.Service.PassthroughOpens in a new tab and EnsLib.MQTT.Operation.PassthroughOpens in a new tab, respectively. If you want to use the MQTT protocol outside of an interoperability production, you can use the lower-level %Net.MQTT classes.

The MQTT protocol has uses an MQTT broker server and MQTT clients. Clients publish messages and subscribe to messages. Clients publish messages to the broker and clients subscribe to the broker to receive messages. This architecture allows a client to subscribe to messages published by many different publishers with only one connection to the broker.

In many cases, you can access the MQTT broker using the built-in business service and operation, but if you need more complex behavior you may need to create custom code using the adapters.

The MQTT classes use the Eclipse Paho MQTT C Client LibraryOpens in a new tab.

FeedbackOpens in a new tab