HS.FHIRModel.R4.DeviceMetric
class HS.FHIRModel.R4.DeviceMetric extends HS.FHIRModel.FHIRClassSuper
******************************************* DeviceMetric generated class schema
*****************************************
Describes a measurement, calculation or setting capability of a medical device.
Property Inventory
- _category
- _color
- _implicitRules
- _language
- _operationalStatus
- calibration
- category
- color
- contained
- extension
- fhirID
- identifier
- implicitRules
- language
- measurementPeriod
- meta
- modifierExtension
- operationalStatus
- parent
- resourceType
- source
- text
- type
- unit
Method Inventory
- IncludeCalibration()
- IncludeContained()
- IncludeExtension()
- IncludeIdentifier()
- IncludeMeasurementPeriod()
- IncludeMeta()
- IncludeModifierExtension()
- IncludeParent()
- IncludeSource()
- IncludeText()
- IncludeType()
- IncludeUnit()
- _getProperties()
- fromDao()
- toDao()
Parameters
parameter XMLTYPE = R4_DEVICEMETRIC;
Inherited description: This parameter provides the default XMLTYPE for the class. If it is
empty then the class name will be used to construct a default XML type.
The default XMLTYPE is used when naming and referencing this type in a schema and the schema context did not provide an XML type name.
Properties
property _category as HS.FHIRModel.R4.Element;
Extensions for category
Property methods: _categoryGet(), _categoryGetSwizzled(), _categoryIsValid(), _categoryNewObject(), _categorySet()
property _color as HS.FHIRModel.R4.Element;
Extensions for color
Property methods: _colorGet(), _colorGetSwizzled(), _colorIsValid(), _colorNewObject(), _colorSet()
property _implicitRules as HS.FHIRModel.R4.Element;
Extensions for implicitRules
Property methods: _implicitRulesGet(), _implicitRulesGetSwizzled(), _implicitRulesIsValid(), _implicitRulesNewObject(), _implicitRulesSet()
property _language as HS.FHIRModel.R4.Element;
Extensions for language
Property methods: _languageGet(), _languageGetSwizzled(), _languageIsValid(), _languageNewObject(), _languageSet()
property _operationalStatus as HS.FHIRModel.R4.Element;
Extensions for operationalStatus
Property methods: _operationalStatusGet(), _operationalStatusGetSwizzled(), _operationalStatusIsValid(), _operationalStatusNewObject(), _operationalStatusSet()
property calibration as HS.FHIRModel.R4.DeviceMetricX.SeqOfDeviceMetricXCalibration;
Describes the calibrations that have been performed or that are required
to be performed.
Property methods: calibrationGet(), calibrationGetSwizzled(), calibrationIsValid(), calibrationNewObject(), calibrationSet()
property category as %String (VALUELIST = ",measurement,setting,calculation,unspecified");
Indicates the category of the observation generation process. A DeviceMetric
can be for example a setting, measurement, or calculation.
Property methods: categoryDisplayToLogical(), categoryGet(), categoryIsValid(), categoryLogicalToDisplay(), categoryLogicalToOdbc(), categoryNormalize(), categorySet()
property color as %String (VALUELIST = ",black,red,green,yellow,blue,magenta,cyan,white");
Describes the color representation for the metric. This is often
used to aid clinicians to track and identify parameter types by
color. In practice, consider a Patient Monitor that has ECG/HR and
Pleth for example; the parameters are displayed in different characteristic
colors, such as HR-blue, BP-green, and PR and SpO2- magenta.
Property methods: colorDisplayToLogical(), colorGet(), colorIsValid(), colorLogicalToDisplay(), colorLogicalToOdbc(), colorNormalize(), colorSet()
property contained as HS.FHIRModel.R4.SeqOfResourceList;
These resources do not have an independent existence apart from the
resource that contains them - they cannot be identified independently,
and nor can they have their own independent transaction scope.
Property methods: containedGet(), containedGetSwizzled(), containedIsValid(), containedNewObject(), containedSet()
property extension as HS.FHIRModel.R4.SeqOfExtension;
May be used to represent additional information that is not part
of the basic definition of the resource. To make the use of extensions
safe and manageable, there is a strict set of governance applied
to the definition and use of extensions. Though any implementer
can define an extension, there is a set of requirements that SHALL
be met as part of the definition of the extension.
Property methods: extensionGet(), extensionGetSwizzled(), extensionIsValid(), extensionNewObject(), extensionSet()
property fhirID as %String;
The logical id of the resource, as used in the URL for the resource.
Once assigned, this value never changes.
Property methods: fhirIDDisplayToLogical(), fhirIDGet(), fhirIDIsValid(), fhirIDLogicalToDisplay(), fhirIDLogicalToOdbc(), fhirIDNormalize(), fhirIDSet()
property identifier as HS.FHIRModel.R4.SeqOfIdentifier;
Unique instance identifiers assigned to a device by the device or
gateway software, manufacturers, other organizations or owners.
For example: handle ID.
Property methods: identifierGet(), identifierGetSwizzled(), identifierIsValid(), identifierNewObject(), identifierSet()
property implicitRules as %String;
A reference to a set of rules that were followed when the resource
was constructed, and which must be understood when processing the
content. Often, this is a reference to an implementation guide that
defines the special rules along with other profiles etc.
Property methods: implicitRulesDisplayToLogical(), implicitRulesGet(), implicitRulesIsValid(), implicitRulesLogicalToDisplay(), implicitRulesLogicalToOdbc(), implicitRulesNormalize(), implicitRulesSet()
property language as %String;
The base language in which the resource is written.
Property methods: languageDisplayToLogical(), languageGet(), languageIsValid(), languageLogicalToDisplay(), languageLogicalToOdbc(), languageNormalize(), languageSet()
property measurementPeriod as HS.FHIRModel.R4.Timing;
Describes the measurement repetition time. This is not necessarily
the same as the update period. The measurement repetition time can
range from milliseconds up to hours. An example for a measurement
repetition time in the range of milliseconds is the sampling rate
of an ECG. An example for a measurement repetition time in the range
of hours is a NIBP that is triggered automatically every hour. The
update period may be different than the measurement repetition time,
if the device does not update the published observed value with
the same frequency as it was measured.
Property methods: measurementPeriodGet(), measurementPeriodGetSwizzled(), measurementPeriodIsValid(), measurementPeriodNewObject(), measurementPeriodSet()
property meta as HS.FHIRModel.R4.Meta;
The metadata about the resource. This is content that is maintained
by the infrastructure. Changes to the content might not always be
associated with version changes to the resource.
Property methods: metaGet(), metaGetSwizzled(), metaIsValid(), metaNewObject(), metaSet()
property modifierExtension as HS.FHIRModel.R4.SeqOfExtension;
May be used to represent additional information that is not part
of the basic definition of the resource and that modifies the understanding
of the element that contains it and/or the understanding of the
containing element's descendants. Usually modifier elements provide
negation or qualification. To make the use of extensions safe and
manageable, there is a strict set of governance applied to the definition
and use of extensions. Though any implementer is allowed to define
an extension, there is a set of requirements that SHALL be met as
part of the definition of the extension. Applications processing
a resource are required to check for modifier extensions. Modifier
extensions SHALL NOT change the meaning of any elements on Resource
or DomainResource (including cannot change the meaning of modifierExtension
itself).
Property methods: modifierExtensionGet(), modifierExtensionGetSwizzled(), modifierExtensionIsValid(), modifierExtensionNewObject(), modifierExtensionSet()
property operationalStatus as %String (VALUELIST = ",on,off,standby,entered-in-error");
Indicates current operational state of the device. For example: On,
Off, Standby, etc.
Property methods: operationalStatusDisplayToLogical(), operationalStatusGet(), operationalStatusIsValid(), operationalStatusLogicalToDisplay(), operationalStatusLogicalToOdbc(), operationalStatusNormalize(), operationalStatusSet()
property parent as HS.FHIRModel.R4.Reference;
Describes the link to the Device that this DeviceMetric belongs
to and that provide information about the location of this DeviceMetric
in the containment structure of the parent Device. An example would
be a Device that represents a Channel. This reference can be used
by a client application to distinguish DeviceMetrics that have the
same type, but should be interpreted based on their containment
location.
Property methods: parentGet(), parentGetSwizzled(), parentIsValid(), parentNewObject(), parentSet()
property resourceType as %String [ InitialExpression = "DeviceMetric" , Required ];
This is a DeviceMetric resource
Property methods: resourceTypeDisplayToLogical(), resourceTypeGet(), resourceTypeIsValid(), resourceTypeLogicalToDisplay(), resourceTypeLogicalToOdbc(), resourceTypeNormalize(), resourceTypeSet()
property source as HS.FHIRModel.R4.Reference;
Describes the link to the Device that this DeviceMetric belongs
to and that contains administrative device information such as manufacturer,
serial number, etc.
Property methods: sourceGet(), sourceGetSwizzled(), sourceIsValid(), sourceNewObject(), sourceSet()
property text as HS.FHIRModel.R4.Narrative;
A human-readable narrative that contains a summary of the resource
and can be used to represent the content of the resource to a human.
The narrative need not encode all the structured data, but is required
to contain sufficient detail to make it "clinically safe" for a
human to just read the narrative. Resource definitions may define
what content should be represented in the narrative to ensure clinical
safety.
Property methods: textGet(), textGetSwizzled(), textIsValid(), textNewObject(), textSet()
property type as HS.FHIRModel.R4.CodeableConcept [ Required ];
Describes the type of the metric. For example: Heart Rate, PEEP Setting,
etc.
Property methods: typeGet(), typeGetSwizzled(), typeIsValid(), typeNewObject(), typeSet()
property unit as HS.FHIRModel.R4.CodeableConcept;
Describes the unit that an observed value determined for this metric
will have. For example: Percent, Seconds, etc.
Property methods: unitGet(), unitGetSwizzled(), unitIsValid(), unitNewObject(), unitSet()
Methods
method IncludeCalibration()
method IncludeContained()
method IncludeExtension()
method IncludeIdentifier()
method IncludeMeasurementPeriod()
method IncludeMeta()
method IncludeModifierExtension()
method IncludeParent()
method IncludeSource()
method IncludeText()
method IncludeType()
method IncludeUnit()
method _getProperties() as %DynamicArray
Inherited description: Return an array of the defined properties of this class
in the definition order that they were discovered in the
the HL7FHIR JSchema document
classmethod fromDao(dao As %Library.DynamicAbstractObject) as HS.FHIRModel.R4.DeviceMetric
method toDao() as %DynamicAbstractObject
Inherited description: >
The toDao() method casts the set to a DAO.
Inherited Members
Inherited Methods
- %AddToSaveSet()
- %ClassIsLatestVersion()
- %ClassName()
- %ConstructClone()
- %DispatchClassMethod()
- %DispatchGetModified()
- %DispatchGetProperty()
- %DispatchMethod()
- %DispatchSetModified()
- %DispatchSetMultidimProperty()
- %DispatchSetProperty()
- %Extends()
- %GetParameter()
- %IsA()
- %IsModified()
- %New()
- %NormalizeObject()
- %ObjectModified()
- %OriginalNamespace()
- %PackageName()
- %RemoveFromSaveSet()
- %SerializeObject()
- %SetModified()
- %ValidateObject()
- XMLDTD()
- XMLExport()
- XMLExportToStream()
- XMLExportToString()
- XMLNew()
- XMLSchema()
- XMLSchemaNamespace()
- XMLSchemaType()
- add()
- addAll()
- apply()
- clear()
- contains()
- containsAll()
- get()
- iterator()
- put()
- putAll()
- putAllIfAbsent()
- putIfAbsent()
- remove()
- removeAll()
- removeIf()
- rename()
- replace()
- replaceAll()
- size()
- toString()